Home
About us
Products & Service
 
Pumps for slurry-transportation
Pumps for water industry
Pumps for petroleum & chemical and other products
Casting & Machining
Quality and Capability
Contact us

Pump Range Capacity Head
Series PY(S) Oil pumps 15~840 m3/h 4~233 l/s 85~125 m
Other Products Range      
Series FXZ Cyclone      
Series ZRJ Slurry Agitator      
Series ZN Valve      
Series YQWG Submersible Sewage Motor      
YQS Submersible Three-phase asynchronous Motor For Well      
LQQ Full-voltage Starter      
LEQ Self-coupling Reduced-voltage Starter      

Series PY(S) oil pump  
Diameter: 65~300 mm
Capacity: 15~840 m3/h
Head: 85~125 m
Application: It is used as the main device for catalyzing and cracking equipment in refinery. It can deliver oil including powder solid less than 20 g/L and temperature not higher than 420 ¡æ.
Feature: It is horizontal, single-stage, centrifugal pump

Series FXZ cyclone  
Diameter: 400~700 mm
Capacity: 40~200 m3/h
Enterable particle size: 0~50 mm
Application: It is widely used in smelting, mining, petrochemistry, coal mine, power, sanitary and food industries, served as device of grader, filtration, desliming, and abstersion.
Feature:Simple construction, high efficiency and long service life.

Series ZRJ slurry agitator  
Impeller diameter: 400~830 mm
Agitating quantity: 500~3600 m3/h
Shaft speed: 235~290 r/min
Application: It is used for agitating liquid contained solids in industry and mining, and for agitating sewage to be oxidized in sewage treatment works.
Feature: Simple construction, advanced design, high efficiency and long service life.

Series ZN valve  
Diameter: 80~500 mm
Normal pressure: 0.25~1.6 MPa
Application: It applies to the pipelines which delivery liquid contained solids in mining, power plant and sewage treatment industry as throttling and headstock device for controlling medium flowing.
Feature: Compact volume, light weight, little resistance and long service life.

Series YQWG submersible sewage motor  
Rated power: 3.0~18.5 KW
Speed: 750~3000 r/min
Voltage: 380 V
Efficiency: 81%
Application: It is designed to be coupled to different types of sewage pumps as complete units and to be submerged into sewage water.
Feature: Reasonable structure, easy installation, high reliability and unique sealing system.

Series YQS submersible three-phase asynchronous motor for well  
Rated power: 4~100 KW¡¡¡¡Rated current: 10~203.1 A
Speed: 2850 r/min ¡¡¡¡¡¡¡¡ Voltage: 380 V
Efficiency: 76~87%
Application: It is designed to be coupled to different types well submersible pumps as complete units and to be submerged into clear well water in operation for long period. It is suitable for lifting underground water in deep well to supply water for agriculture irrigation, industry production and living water.
Feature: vertical, submerged ,continuous operation and high reliability,

Series LQQ full-voltage starter  
Power: 0~30 KW
Working voltage: 380 V
Frequency: 50 HZ
Application: It is used for the type three-phase cage induction motor which AC is 50HZ frequency ,rated voltage is 380V,rated output power is equal or below 30 KW in case of direct start. Usually match a small-sized submerged sewage motor.
Feature: Simple structure, easy to operate and starting current strong

Series LEQ self-coupling reduced-voltage starter  
Power: 0~300 KW
Working voltage: 380 V
Frequency: 50 HZ
Application: It is used for the type three-phase cage induction motor with AC, 50HZ,380V, 300 KW. It can be started in case of reduced-voltage under the infrequently condition.
Feature: Protection of low-voltage, over-load, short circuit and phase failure in the circuit to insure the motor normally operating.