|
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡  |
¡¡¡¡¡¡¡¡
| Series AH£¨R£©, M Slurry Pump |
|
Diameter£º25~450mm
Capacity£º4~5400m3/h
Head£º5~118m
Application:It is mainly used to handle
high abrasive and/or high density slurries in the metallurgical,
mining, coal, power, building material and other industrial
department.
Feature:Series AH(R) pump is horizontal,
single suction, single -stage, cantilever, double casing
centrifugal slurry pumps. |
 |
| Series H, HH Slurry Pump |
|
Diameter£º25~150mm
Capacity£º16~1125m3/h
Head £º12~95m
Application:It is mainly used to handle
high abrasive and high density slurries in the metallurgical,
mining, coal, power, building material and other industrial
department.
Feature:Series AH(R) pump is horizontal,
single suction, single -stage, cantilever, double casing
centrifugal slurry pumps. |
 |
| Series G, GH Slurry pump |
|
Diameter£º100~400mm
Capacity£º36~5040m3/h
Head £º 5~80m
Application:It is mainly used for dredging
in the dredger, river conservancy, mining, metallurgy
and delivering the explosive-sludge in metal melting.
Feature:Series G, GH
pump is single suction, single-stage, horizontal, cantilever
centrifugal slurry pump. The construction of this pump
is of single casing with wide wet-passage connected by
means of clamp bands. |
 |
| Series L, LR Slurry Pump |
|
Diameter£º20~750mm
Capacity£º20~750mm
Head £º4~60m
Application:It is mainly used for handling
lowly abrasive or density slurries in the metallurgical,
mining, coal, power, building material and other industrial
department.
Feature:Series L, LR pump is cantilever,
horizontal centrifugal pump. It is operated in high speed
they have small volumes and floor area saving. The frame
plates have interchanged wear-resistant metal plate or
rubber liners. |
 |
| Series AF Froth Pump |
|
Diameter£º50~200mm
Capacity£º20~650m3/h
Head £º 5~30m
Application:Type AF froth pumps are
suitable for handling solids-liquid mixture¡¢special for
delivering frothy pulp generated in flotation machines
in metalliferous and coal flotation circuits.
Feature:The construction of type AF
pump is double-casing , all wet parts can be supplied
in Ni-hard ¡¢high chrome alloy iron or rubber-lined material,
the driver parts can be exchanged with that of SP&SPR
pumps.
|
 |
| Series SP Sump Pump |
|
Diameter£º40~300mm
Capacity£º17~1267m3/h
Head £º4~40m
Application:Type SP pumps are submerged
in sump. It is used to deliver abrasive, large particle
and high density slurries.
Feature:Type SP pumps are vertical
centrifugal slurry pump without any shaft seal and seal
water. It can be normally operated under insufficient
duty. All the wet parts are made of wear-resistant metal. |
 |
| Type SPR Slurry pump |
|
Diameter£º40~150mm
Capacity£º17~500m3/h
Head £º4~35m
Application:Type SPR pumps are submerged
in sump to be operated. It is used to deliver corrosive,
large particle and high density slurries.
Feature:Type SP pumps
are vertical centrifugal slurry pump without any shaft
seal and seal water. It can be normally operated under
insufficient duty. All the parts submerged in sump are
lined with rubber. |
 |
| Series S, SH Solution Pump |
|
Diameter£º75~400mm
Capacity£º10~3600m3/h
Head £º10~120m
Application:Type S, SH solution pumps
are mainly used for delivering solution fluids in processing
such as :mill circuit water, thickener overflows, industrial
waste, tailings dam return water, filtrate return, plant
cooling water, dredge pump priming and spray water.
Feature:Type S, SH pumps
are single casing, horizontal, cantilever centrifugal
slurry pump. The casing and impeller are made of ductile
iron. If necessary they can be made of alloy material.
|
 |
|
|
